Skip to content
RINFLO High-Performance Filtration

Air goes in dirty.
Air comes out clean.

Everything in between is engineered. Simple physics, done properly.

01

Measured

Every RINFLO starts with the OE part it replaces. Measured and drawn in CAD.

02

Engineered

Built from day one for one thing: powersports. Not borrowed from a car catalogue.

03

Tested

The filter material is tested for air permeability. Each finished unit is tested individually before shipping.

RINFLO A1 air filter geometry scan with dimensionsAirflow schematic: air enters through the cotton gauze, filtered air exits at the baseMacro of the pleat structure with the air permeability value 2235.8 L/m²/s

General
technical
specifications

Air permeability is the volume of air that passes through one square metre of filter material per second at a fixed pressure drop. Higher means the engine has to work less to breathe.

The test follows ASTM D737 at 20 mmH₂O (≈ 200 Pa) over a 50 mm diameter test area. The A1 cotton gauze averages 2235.8 L/m²/s.

Values refer to the A1 filter material only. They do not apply to O1, B1 or C1.

ParameterValue
ParameterAir permeabilityValue2235.8 L/m²/s
ParameterPressure dropValue20 mmH₂O (≈ 200 Pa)
ParameterTest standardValueASTM D737
ParameterTest areaValue50 mm diameter
ParameterFilter mediaValueCotton gauze
ParameterMaintenanceValueWashable and reusable
ParameterPre-filterValueMesh included